HP (Hewlett-Packard) 4100TN ユーザーズマニュアル
130 Chapter 4 - Problem solving
EN
Light print (partial page)
1
The toner cartridge might be low. Replace the toner cartridge.
2
Maintenance might be due. Check this by printing a copy of the
supplies status page (see “Supplies status page” on page 154). If
maintenance is due, order and install the printer maintenance kit
(see “Performing preventative maintenance” on page 93).
supplies status page (see “Supplies status page” on page 154). If
maintenance is due, order and install the printer maintenance kit
(see “Performing preventative maintenance” on page 93).
3
The toner cartridge might be almost empty. Replace the toner
cartridge.
cartridge.
Light print (entire page)
1
Make sure that EconoMode is turned off (see
ECONOMODE
2
At the printer control panel, use the Print Quality Menu to
increase the toner density setting (see
increase the toner density setting (see
TONER DENSITY
in “Print
3
Try using a different type of paper.
4
The toner cartridge might be almost empty. Replace the toner
cartridge.
cartridge.
Specks
Specks might appear on a page after a jam has been cleared.
1
Print a few more pages to see if the problem corrects itself.
2
If specks occur frequently, set your printer up to automatically run
a cleaning page (see “Running the cleaning page automatically”
on page 92).
a cleaning page (see “Running the cleaning page automatically”
on page 92).
3
Clean the inside of the printer (see “Cleaning the printer”
on page 88) and run a manual cleaning page to clean the fuser
(see “Running the cleaning page manually” on page 91).
on page 88) and run a manual cleaning page to clean the fuser
(see “Running the cleaning page manually” on page 91).
4
Try using a different type of paper.
5
Check for toner cartridge leaks. If the toner cartridge is leaking,
replace it.
replace it.