HP (Hewlett-Packard) 4100TN ユーザーズマニュアル
EN
Configuration Menu 221
PRINT PS ERRORS=
OFF
OFF
ON
Select
ON
to print the PS error page when PS
errors occur.
RAM DISK=AUTO
OFF
ON
AUTO
Determine how the RAM disk is configured.
This item appears only if there is no optional
hard disk accessory installed and the printer
has at least 16 MB of memory.
This item appears only if there is no optional
hard disk accessory installed and the printer
has at least 16 MB of memory.
OFF
: The RAM disk is disabled.
ON
: The RAM disk is enabled. Configure the
amount of memory to be used through the
following item:
following item:
RAM DISK SIZE
.
Note
If the setting is changed from
OFF
to
ON
or from
OFF
to
AUTO
, the printer will automatically
reinitialize when it becomes idle.
QUICK COPY
JOBS=32
1
to
50
Specifies the number of quick copy jobs that
can be stored on the printer’s hard disk
accessory.
can be stored on the printer’s hard disk
accessory.
HELD JOB
TIMEOUT=OFF
OFF
1 HOUR
4 HOURS
1 DAY
1 WEEK
Sets the amount of time that held jobs are kept
before being automatically deleted from the
queue.
before being automatically deleted from the
queue.
PERSONALITY=
AUTO
AUTO
PCL
PS
Select the default printer language
(personality). Possible values are determined
by which valid languages are installed in the
printer.
(personality). Possible values are determined
by which valid languages are installed in the
printer.
Normally you should not change the printer
language (the default is
language (the default is
AUTO
). If you change it
to a specific printer language, the printer will
not automatically switch from one language to
another unless specific software commands
are sent to the printer.
not automatically switch from one language to
another unless specific software commands
are sent to the printer.
Configuration Menu (continued)
Item
Values
Explanation