CTX M730V ユーザーズマニュアル

♦♦♦

4

• Power
– Use the type of power indicated on the marking label.
• Plugs
– Do not remove any of the prongs of the monitor's three-pronged power plug.
– Disconnect the power plug from the AC outlet if you are not going to use it for an

indefinite period of time.

• Power cords
– Use the proper power cord with correct attachment plug type. If the power source

is 120 VC, use a power cord that has UL and CSA approvals. If the power source
is a 240 VAC supply, use the tandem (T blade) type attachment plug with ground
conductor power cord that meets the respective European country's safety
regulations, such as VDE for Germany.

– We recommend using the power cord supplied with the product. However, if

another type of power cord is required power cord H05VV-F or VW-1, 18AWG x
3G should be used.

– Do not overload wall outlets or power cords. Ensure that the total of all units

plugged into the wall outlet does not exceed 7 amperes.

– Ensure that the total ampere ratings on all units plugged into the extension cord is

not above the cord's rating.

– If the power supply cord which came with your monitor is to be connected to the

PC instead of the wall outlet, this equipment should be used with UL/TUV approved
computers with receptacle rated 100~240V AC, 50/60Hz, 1.1A (minimum).

– Do not allow anything to rest on the power cord. Do not locate this product

where persons will walk on the cord.

• Environment
– Place the monitor on a flat level surface.
– Place the monitor in a well-ventilated place.
– Keep the monitor away from:

rain or water
overly hot, cold or humid places
sunlight
dusty surroundings
equipment that generates strong magnetic fields