Toshiba e-STUDIO351c ユーザーズマニュアル

e-STUDIO281c/351c/451c ADJUSTMENT

June 2005 © TOSHIBA TEC

3 - 40

3.6.6

Upper limit value at Toner Saving Mode

The upper limit value is adjusted at the Toner Saving Mode.

<Procedure>
Procedure is same as that of “3.6.5 Adjustment of smudged/faint text”.

3.6.7

Dot size adjustment in black printing

The dot size is adjusted in primary scanning direction in black printing.

<Procedure>
Procedure is same as that of “3.6.5 Adjustment of smudged/faint text”.

3.6.8

Maximum toner density adjustment to paper type

The maximum toner amount adhering to the paper can be controlled.

<Procedure>
Procedure is same as that of “3.6.3 Gamma balance adjustment”.

Note:

The larger the value is, the more frequently fusing offsetting occurs.

3.6.9

Image processing: Gamma correction table all clearing

The state of calibration in color printing mode is initialized at the Setting Mode (08-597). This setting is
to be performed when a defect occurs in “Automatic gamma adjustment (05-1000 to 1003)”. The cause
of defect is presumed as an image failure (jittering or uneven image density) at the patch chart for
gamma adjustment.

Black mode

Language

Remarks

PCL

600x600dpi 1200x600dpi 600x600dpi 1200x600dpi

664

665

1055

1056

1057

1058

The smaller the value is, the lighter

the density of image becomes.

Acceptable values: 0 to 255.

(Default: 176)

Code

Remarks

663

The smaller the value is, the dot size becomes smaller.

Acceptable values: 0 to 255. (Default: 255)

Code

Paper type

Remarks

PCL

1046-0

1046-1

Plain paper

The smaller the value is, the toner amount adhered

decreases of the high density area (ex. prevention of fusing

offsetting, etc).

Acceptable values: 0 to 255. (Default: Plain paper: 255, Thick

paper 1:

255, Thick paper 2: 255, Thick paper 3: 255, OHP film: 200)

1047-0

1047-1

Thick paper 1

1048-0

1048-1

Thick paper 2

1049-0

1049-1

Thick paper 3

1050-0

1050-1

OHP film