Viewsonic VS13510 ユーザーズマニュアル

Status 

Power ON 

Green

Power Standby 

Red

Power OFF 

LED Off 

Diagnosis  
(Detecting failure) 

Red Blinking 
* See troubleshooting 

Please turn off the LCD monitor when it will not be used for long time. This could potentially increase the life and decrease the power 
consumption of the LCD monitor. 
Standby mode:

 Push the power button on the remote control or on the monitor to enter the standby mode. 

: Push the Main Power Switch to enter the power off mode. 

Use the input button on the front panel or the VIDEO SOURCE button on the remote control to set video source to [VIDEO]. 
Use the COLOR SYSTEM OSD menu to select [AUTO], [NTSC], [PAL], [SECAM], [PAL60], [4.43NTSC], according to your video format. 

HDMI, DVI-D, VGA

FULL     NORMAL 

 CUSTOM 

 

                        REAL 

COMPONENT, VIDEO

FULL     NORMAL 

 DYNAMIC 

REAL 

     CUSTOM 

Signal Type 

NORMAL SIZE 

Recommended Size 

NORMAL 

4:3

DYNAMIC 

Squeeze 

FULL 

Display with the input signal aspect ratio from PC signal, or display in 4:3 aspect ratio at COMPONENT or VIDEO signal. 

Display in the entire screen. 

Expand 4:3 pictures to the entire screen with non-linearity. (Some round image might be cut by expansion.)   

Images can be expanded beyond the active display area. The image which is outside of the active display area would 

not be shown. 

Image will be displayed for one by one pixel. 

ZOOM 

 ZOOM 

CD4233

25