Viewsonic G510b ユーザーズマニュアル

Setting the timing mode is important for maximizing the quality of the 
screen image and minimizing eye strain. The timing mode consists of the 
resolution (example 1

280 x 1024) and refresh rate (or vertical frequency; 

example 60 Hz). After setting the timing mode, use the OnView

®

 controls 

to adjust the screen image. 

For the best picture quality set your LCD display timing mode to: 
VESA 1

To set the Timing Mode:

Set the resolution: Right-click on the Windows

®

 desktop > Properties > 

Settings > set the resolution.

Set the refresh rate: See your graphic card's user guide for instructions.

Do not set the graphics card in your computer to exceed the 

maximum refresh rate of 

85Hz; doing so may result in permanent damage to 

your LCD display.

• OSD Lock: Press and hold [1] and the up arrow 

▲

 for 10 seconds. If any 

buttons are pressed the message OSD Locked will display for a few seconds.

• OSD Unlock: Press and hold [1] and the up arrow 

▲

 again for 10 seconds.

• Power Button Lock: Press and hold [1] and the down arrow 

▼

 for 10 

seconds. If the power button is pressed the message Power Button Locked
will display for a few seconds. With or without this setting, after a power 
failure, your LCD display’s power will automatically turn on when power is 
restored.

• Power Button Unlock: Press and hold [1] and the down arrow 

▼

 again for 

10 seconds.

VG510b/VG510s

    6