JVC DT-E17L4G ユーザーズマニュアル
10
Front panel
1 Speakers (stereo)
The speakers emit the same audio signal emitted from the AUDIO
(MONITOR OUT) terminals. (☞ “ 6 AUDIO terminals” on page 8)
(MONITOR OUT) terminals. (☞ “ 6 AUDIO terminals” on page 8)
2 Picture adjustment knob
PHASE:
Adjusts the picture hue.
CHROMA:
Adjusts the picture color density.
BRIGHT:
Adjusts the picture brightness.
CONTRAST:
Adjusts the picture contrast.
●
PHASE and CHROMA cannot be adjusted for certain signal
formats.
●
When “Component Phase” is set to “Disable” and an NTSC signal
is input, PHASE can be adjusted (☞ page 18).
3 VOLUME adjustment button/EMBEDDED AUDIO setting
button
Adjusts the volume when no menu screen is displayed.
Selects an audio channel when EMBEDDED AUDIO signals are
contained in SDI input. (☞ “Volume Adjustment/Audio Channel
Selection” on page 11)
Selects an audio channel when EMBEDDED AUDIO signals are
contained in SDI input. (☞ “Volume Adjustment/Audio Channel
Selection” on page 11)
4 MUTING button
Turns off the sound when no menu screen is displayed.
●
To cancel the function, press the button again.
●
Muting function is also canceled when “Balance” of “Audio
Setting” in the Main Menu is changed (☞ page 16).
5 / / / buttons
When a menu screen is displayed selects or adjusts menu items.
(☞ “The operation procedure” on page 12)
(☞ “The operation procedure” on page 12)
6 FUNCTION button
Assign functions to the F1 and F2 buttons when the menu is not
displayed. (☞ page 21)
displayed. (☞ page 21)
7 MENU button
Activates/deactivates the display of the Main Menu. (☞ “The
operation procedure” on page 12)
operation procedure” on page 12)
8 COLOR OFF button/lamp
Displays only the luminance signal.
●
This function does not work for RGB input signals.
9 1:1 button/lamp
Displays the picture in the original resolution of the input signal.
●
The aspect ratio of the picture may change depending on the
input signal.
p AREA MARKER button/lamp
Displays/hides the area marker.
●
Select the style of the area marker in “Marker” of the Main Menu
(☞ page 15).
●
This function works only when displaying the picture in 16:9
aspect ratio.
Daily Operations
“No Effect” is displayed when you press a button which is not
•
available for the current input or signal format (the lamp lights
even when the function does not actually work).
The items controlled by the MAKE system cannot be controlled
even when the function does not actually work).
The items controlled by the MAKE system cannot be controlled
•
by the buttons on the front panel (“Remote On” is displayed
and the lamps do not light).
and the lamps do not light).
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER
terminal.
This lamp is controlled by the tally function of the MAKE/TRIGGER
terminal.
You can select the color of the tally lamp from “Green” or “Red.”
•
You can also select whether the whole lamp is turned on at once,
or whether it is turned on one half at a time. (☞ “Tally Setting” in
“Set-Up Menu” on page 17 and “External Control” on page 22)
or whether it is turned on one half at a time. (☞ “Tally Setting” in
“Set-Up Menu” on page 17 and “External Control” on page 22)
The illustration of the monitor is of DT-E21L4.
●
This function does not work when “Area Marker” or “R-Area
Marker” is set to “Off” in “Marker.”
q SAFETY MARKER button/lamp
Displays/hides the safety marker.
●
Adjust the area of the safety marker in “Marker” of Main Menu
(☞ page 15).
●
This function will not work when the picture is displayed in 1:1
aspect ratio and “SD 4:3 Size” on the menu is set to “H Full”.
●
This function does not work when “Safety Marker” or “R-Safety
Marker” is set to “Off” in “Marker.”
w SCREENS CHECK button/lamp
Displays only the selected element (R, G, or B) of the video signal.
●
Each time you press this button, the picture changes in the
following order.
e T.C. (time code) button/lamp
Activates/deactivates the display of the time data (time code)
contained in the SDI signal. (☞ “On the Information Display” on
page 11)
contained in the SDI signal. (☞ “On the Information Display” on
page 11)
●
Select the time code type in “Information” of Set-Up Menu (☞
page 19).
r INPUT SELECT buttons/lamps
Selects an input.
SDI 1:
SDI 1:
E. AUDIO HD/SD SDI (IN 1) terminal
SDI 2:
E. AUDIO HD/SD SDI (IN 2) terminal
HDMI:
HDMI terminal
COMPO./RGB: COMPO./RGB terminal
VIDEO:
VIDEO:
VIDEO terminal
●
The lamp for the selected input lights.
t F1/F2 buttons/lamps
You can use the functions assigned to this button.
y Power lamp
Unlit:
The monitor is completely off (the power switch
on the rear panel is turned off).
In Low Power Mode (☞ page 20)
Lights in Green: The monitor is on.
Lights in orange: The monitor is off (on standby).
Flashes in orange: The monitor is in the Power Save (power save) mode.
Lights in orange: The monitor is off (on standby).
Flashes in orange: The monitor is in the Power Save (power save) mode.
(☞ “No Sync Action” in “Sync Function” on page 17)
u
button
Turns on and off (on standby) the monitor.
●
The power switch is equipped on the rear panel of the monitor
(☞ 1 on page 8).
RGB (Normal screen)
Red screen
Blue screen
Green screen
DTE21L417L4G_EN_1.indb 10
12.2.24 4:01:02 PM