JVC DT-V9L5 ユーザーズマニュアル

ページ / 56
47
47
Specifications
 General
Model name
DT-V9L5
DT-F9L5
Type 
Multi format LCD monitor
Screen size
Type 8.2 wide format 
Aspect ratio
16:10
Compliant video signal format
 
☞ “Available signals” on page 49
Format 
HD SDI:  
SMPTE292M
SD SDI:  
ITU-R BT.656, SMPTE259M
EMBEDDED AUDIO 16CH: 
SMPTE299M, SMPTE272M
Audio output 
Internal speaker: 1.0 W
None
Operating conditions 
(Slightly variable depending on 
ambient conditions for installation.)
Operating temperature: 5°C – 35°C
Operating humidity: 20% – 80% (non-condensing)
Operating temperature: 0°C – 35°C with 
Operating humidity: 20% – 80% (non-condensing) /
Operating temperature: 35°C – 40°C with 
Operating humidity: 20% – 50% (non-condensing) 
Power requirements 
AC 120 V / AC 220 V – 240 V, 50 Hz/60 Hz or DC 12 V – 17 V DC 12 V – 17 V
Rated current
0.5 A (AC 120 V)
0.25 A (AC 220 V– 240 V)
1.3 A (DC 12 V - 17 V)
1.3 A (DC 12 V - 17 V)
External dimensions
(excluding protruding parts)
with the stand
without the stand
Width:
217 mm
Width:
217 mm
217 mm
Height: 218 mm 
Height:
176 mm
176 mm
Depth: 185 mm
Depth:
116 mm
83.5 mm
Weight
3.2 k
g (with the stand)
2.3 k
g (without the stand)
1.7 k
Accessories 
AC power cord x 2, Power cord holder x 1, Screw x 2 (for 
power cord holder), Protective filter x 1, 
Screw (for protective filter) x 4
Protective filter x 1, Screw (for protective filter) x 4, 
Tripod base x 1, Screw (for tripod base) x 4
 LCD panel
Type
8.2˝ wide, active matrix TFT
Effective screen size
Width: 
176.4 mm
Height: 110.4 
mm
Diagonal: 208.3 mm
Number of pixels displayed
1280 x 800
Number of colors displayed
16.70 million
Viewing angle (TYP.)
160° (Horizontally - Left: 80°, Right: 80°), 160° (Vertically - Upward: 80°, Downward: 80°)
Brightness (TYP.)
360 cd/m
2
450 cd/m
2
Contrast ratio (TYP.)
800:1
 Input/output terminals
Video
VIDEO
Input/output of composite signal:
1 line, BNC connector x 2, 1 V (p-p), 75 Ω
*  The input (IN) and output (OUT) terminals are bridge-connected 
(auto termination).
HDMI
HDMI signal input (compatible with HDCP): 
HDMI connector x 1
COMPO. 
(Y, Pb/B-Y, Pr/R-Y)
Analog Component signal input:
1 Line, BNC connector x 3
Y: 1 V(p-p), 75 Ω(with sync)
PB/B-Y, PR/R-Y: 0.7 V (p-p), 75 Ω
E. AUDIO HD/SD SDI (IN 1) 
Digital signal input (compatible with EMBEDDED AUDIO signals):
 
 
auto detection, 2 line, BNC connector x 2
E. AUDIO HD/SD SDI (IN 2) 
E. AUDIO HD/SD SDI
(SWITCHED OUT)
Digital signal output (compatible with EMBEDDED AUDIO signals):
 
 
1 line switched out, BNC connector x 1
Audio
AUDIO (IN)
Analog audio signal input:   
1 line, RCA connector x 1, 500 mV (rms), high impedance
AUDIO (MONITOR OUT)
Analog audio signal output:  
2 line, RCA connector x 2, 500 mV (rms)
External 
control
REMOTE (MAKE/TRIGGER)
☞ “Using the MAKE/TRIGGER system” on page 42
REMOTE (RS-232C)
☞ “Using the serial communication” on page 43
DT-F9L5_EU.indb   47
DT-F9L5_EU.indb   47
2012/12/18   14:13:09
2012/12/18   14:13:09