JVC DT-V24L3DY ユーザーズマニュアル

Menu Configuration—MAIN MENU

PICTURE FUNCTION

Setting for the picture quality

Item

To do

Setting value

MOVING
PICTURE*

Reduce the lag of moving pictures which is peculiar to LCD.

OFF, ON

APERTURE
FREQ.*

Select the frequency of the luminance signal compensated in
“APERTURE LEVEL.”

OFF, LOW, HIGH

APERTURE
LEVEL*

Compensate the frequency response of the luminance signal of the
video signal.

01 – 10

CTI

Adjust the clearness of the outlines of the chrominance signal.

OFF, NORMAL, HARD

LTI

Adjust the clearness of the outlines of the luminance signal.

OFF, NORMAL, HARD

I/P MODE

Selects a proper mode corresponding to the input picture.

NORMAL, CINEMA,
FIELD

sub menu

Display the sub menu which enables you to adjust the items of “PICTURE FUNCTION” while
viewing the actual picture.

reset

Restore the default settings for all the items in “PICTURE FUNCTION.”

DT-V24L3DY only

Memorized for each input.

BACK LIGHT

Adjusts the brightness of the display.

DVI INPUT SEL.

When “AUTO” is selected, the format of signals come in to the DVI-D (HDCP) terminal is automatically
recognized. (Normally, select “AUTO.”)
• Select “MODE1”, “MODE2” or “MODE3” when the picture is not displayed correctly with “AUTO.”
• DVI-D input of the monitor is compatible with HDCP.

COMPO./RGB SEL.

Selects the signal type you want to use for COMPO./RGB terminals.

Operation guide
Shows the buttons for each operation.

For the operation procedure, see page 7.

•  The menu automatically disappears in about 30 seconds after the previous operation.
•  Some items may not appear on the menu depending on the input or the input signal.
•  The items controlled by the MAKE system do not appear on the menu.

Setting value: –20 – +20

Setting value: AUTO, MODE1, MODE2, MODE3

Setting value: COMPO. (component), RGB

DT-V24_20L3DY_EN.indb 10

08.10.22 3:26:38 PM