Siemens 43B1-M ユーザーズマニュアル
Colour monitor 43B1-M
8 - English
A26361-K883-Z100-1-5E19
1
2
3
4
Ê
Be sure that the monitor and the computer are switched off.
!
The computer power plug must be pulled out!
The permanently connected data cable is equipped with a 15-pin D-SUB plug for connection to the
computer.
computer.
Ê
Connect the connector of the data cable to the active monitor port on the computer and secure
the plug-in connection by tightening the safety screws (1).
the plug-in connection by tightening the safety screws (1).
i
If your computer has two monitor ports ("onboard" screen controller and separate
graphics card), the monitor port for the separate graphics card is usually active.
graphics card), the monitor port for the separate graphics card is usually active.
Ê
Connect the power adapter cable of the power adapter firmly to the power connector of the
monitor (2) and check whether the socket is securely seated.
monitor (2) and check whether the socket is securely seated.
Ê
Connect the power cable to the power adapter (3).
Ê
Connect the plug on the power cable supplied to the monitor socket of the computer (4).
Ê
Plug the power connector of the computer into a properly grounded mains outlet.
i
When you start working with your monitor for the first time you should install the
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.
appropriate graphics drivers for your application software. Details of how to do this are
provided in the documentation on your screen controller/the associated driver software.