Optoma EX542i 95.8FJ02GC0E ユーザーズマニュアル

4

English



Turn on the 

projector fi rst and 

then select the 

signal sources.

Powering On the Projector

.  Remove the lens cap. 
2.  Securely connect the power cord and signal cable. When 

connected, the ON/STANDBY LED will turn Amber. 

3.  Turn on the lamp by pressing “ ” button either on the top of 

the projector or on the remote. The ON/STANDBY LED will 

now turn Green. 

  The startup screen will display in approximately 0 seconds. 

The fi rst time you use the projector, you will be asked to 

select the preferred language and power saving mode.(*) 

4.  Turn on and connect the source that you want to display 

on the screen (computer, notebook, video player, etc). The 

projector will detect the source automatically. If not, push 

menu button and go to “OPTIONS”. 

Make sure that the “Source Lock” has been set to “Off”.



If you connect multiple sources at the same time, press the 

“SOURCE” button on the control panel or direct source keys 

on the remote control to switch between inputs.

POWER

?

POW

ER

?

Lens Cap



Power 

2



(*) When power 

saving mode 

is enabled, the 

VGA & Audio 

pass-through, 

RS-232 and 

RJ-45 will be 

de-activated 

during standby 

mode.