D-Link DCS-930L ユーザーズマニュアル
24
D-Link DCS-930L User Manual
Section 4 - Coniguration
Network Setup
Select this connection if you have a DHCP server running on your
network and would like a dynamic IP address to be updated to your
camera automatically.
network and would like a dynamic IP address to be updated to your
camera automatically.
You may obtain a static or ixed IP address and other network
information from your network administrator for your camera. A static
IP address will ease you for accessing your camera in the future.
information from your network administrator for your camera. A static
IP address will ease you for accessing your camera in the future.
IP Address: The ixed IP address
Subnet Mask: The default value is “255.255.255.0.” Used to determine
if the destination is the same subnet.
Default Gateway: The gateway used to forward frames to destinations
in a diferent subnet. Invalid gateway settings may cause the failure of
transmissions to a diferent subnet.
Primary DNS: Primary domain name server that translates names to
IP addresses.
Secondary DNS: Secondary domain name server to backup the
Primary DNS.
Subnet Mask: The default value is “255.255.255.0.” Used to determine
if the destination is the same subnet.
Default Gateway: The gateway used to forward frames to destinations
in a diferent subnet. Invalid gateway settings may cause the failure of
transmissions to a diferent subnet.
Primary DNS: Primary domain name server that translates names to
IP addresses.
Secondary DNS: Secondary domain name server to backup the
Primary DNS.
DHCP:
Static IP Client:
PPPoE Settings:
Port Settings:
UPnP Settings:
his section allows you to conigure your network settings.
PPPoE settings:If you are using a PPPoE connection, enable it and enter the User Name and Password for your PPPoE account. You can get
this information from your Internet service provider (ISP).
this information from your Internet service provider (ISP).
You may conigure a Second HTTP port that will allow you to connect to the camera via a standard web browser. The port can be set to a
number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to
1010, users must type
number other than the default TCP ports 80. A corresponding port must be opened on the router. For example, if the port is changed to
1010, users must type
http://192.168.0.100:1010 instead of only “http://192.168.0.100”.
Enable this setting to conigure your camera as an UPnP device in the network.