D-Link DCS-930L ユーザーズマニュアル

This is the domain name or IP address of your external e-mail server.

This is the e-mail address of the person sending the camera snapshots.
 
This is the e-mail address of the recipient. 

If  the  SMTP  server  uses  authentication,  you  must  enter  your  user 
name here.

This is the password that corresponds to your user name to connect 
to the SMTP server.

!

his section allows you to conigure the email notiication settings for your camera.

For example, if you want to use Gmail by SSL-TLS for the e-mail notiication, you can follow the 
setup procedure as below:

Step 1 - Enter “smtp.gmail.com” in SMTP Server Address.

Step 2 - Change the SMTP server port number from 25 to 465.

Step 3 - Enter your gmail E-mail address in Sender E-mail Address.

Step 4 - Enter the destination E-mail address in Receiver E-mail Address.

Step 5 - Enter the user name required to access the SMTP server.

Step 6 - Enter the password required to access the SMTP server.

Step 7 - Select SSL-TLS and then click Save Settings.

Step 8 - Click the Test button to send a test e-mail will be sent to the e-mail account listed above.

 

 Note: You can also use 

STARTTLS which will use SMTP server port number 587.

Note: If you want to use the Yahoo SMTP server, the SMTP server address will be diferent between each registered region. And it only supports the SMTP server 
port number 

465 for the SSL-TLS.