D-Link DCS-930L ユーザーズマニュアル

.

-Link’s  DCS-930L  is  a  versatile  and  cost  efective  Network  Camera  ofering  both  video  and  audio  monitoring.  It  can  also  serve  as  a  powerful 

surveillance system in security applications. The DCS-930L can be used with any wired or 802.11n/g wireless router. This section explains how to 
view the camera from either the Internet or from inside your internal network.

Components Needed: 

• 1 DCS-930L Network Camera

• 1 Ethernet Cable 

• A Wired or Wireless router such as the D-Link DIR-655 Wireless Router

• Ethernet based PC for system coniguration

Installing a DCS-930L Network Camera on your network is an easy 4–step procedure:

1. Assign a local IP address to your network camera.

2. View the network camera using your Internet Explorer web browser.

3. Access the router with your web browser.

4. Open virtual server ports to enable remote image viewing.

 These are manual steps; however, if you decide to use the wizard, it will perform every step automatically.

This section is designed to walk you through the setup process for installing your camera behind a router and enable remote video viewing. For 
the basic setup of the DCS-930L, follow the steps outlined in the Quick Installation Guide.

After you have completed the setup of the DCS-930L outlined in the Quick Installation Guide you will have an operating camera that has an assigned 
IP Address. Because you are using a router to share the Internet with one or more PCs, the IP Address assigned to the Network Camera will be a 
local IP Address. This allows viewing within your Local Area Network (LAN) until the router is conigured to allow remote viewing of the camera 
over the Internet.