D-Link DCS-930L ユーザーズマニュアル

D-Link DCS-930L User Manual

Appendix B - Networking Basics

Statically Assign an IP Address

f you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:

Step 1

Windows

Vista - Click on

Start > Control Panel > Network and Internet > Network and Sharing Center > Manage Network Connections.

Windows XP - Click on

Start > Control Panel > Network Connections.

Step 2

Right-click on the

Local Area Connection which represents your D-Link network adapter and select Properties.

Step 3

Highlight

Internet Protocol (TCP/IP) and click Properties.

Step 4

Click

Use the following IP address and enter an IP address that is on the same subnet as your network or

the LAN IP address on your router.

Example: If the router´s LAN IP address is 192.168.0.1, make your IP address 192.168.0.X where X is a number
between 2 and 99. Make sure that the number you choose is not in use on the network. Set Default Gateway
the same as the LAN IP address of your router (192.168.0.1).

Set Primary DNS the same as the LAN IP address of your router (192.168.0.1). The Secondary DNS is not
needed or you may enter a DNS server from your ISP.

Step 5

Click

OK twice to save your settings.