Samsung 793S ユーザーズマニュアル

ページ / 103
90 ~ 264VAC rms, 60/50 Hz ± 3Hz 
Power Consumption
Less than 90W 
Dimensions (WxDxH)
Weight
14.3kg
Environmental considerations
Operating 
Temperature 32°F ~ 104°F(0°C ~ 40°C) 
Humidity 10% ~ 80%, non-condensing
Storage
Temperature -4°F ~113°F (-20°C ~ 45°C) 
Humidity 5% ~ 95%, non-condensing
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. Interaction of the monitor and 
computer systems will provide the best operating conditions and monitor settings. In most cases, 
monitor installation will proceed automatically, unless the user wishes to select alternate settings.
Note: Design and specifications are subject to change without prior notice.
 
 
 
 
PowerSaver
  
This monitor has a built-in power management system called PowerSaver. This system saves energy 
by switching your monitor into a low-power mode when it has not been used for a certain amount of 
time. The monitor automatically returns to normal operation when you press a key on the keyboard. For 
energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for 
long periods. The PowerSaver system operates with a VESA DPMS compliant video card installed in 
your computer. Use a software utility installed on your computer to set up this feature. 
 
State
 
Normal Operation
 
Power-off mode 
Power Indicator
Green
Green, Blinking
Power Consumption
Less than 90W
Less than 1W
 
 
 
Preset Timing Modes
 
If the signal transferred from the computer is the same as the following Preset Timing Modes, the 
screen will be adjusted automatically. However, if the signal differs, the screen may go blank while 
the power LED is on. Refer to the video card manual and adjust the screen as follows. 
 
401 x 410 x 378 mm / 15.8 x 16.1 x 14.9 inch (After installation of Stand)