Samsung 206BW ユーザーズマニュアル

 

 

Before calling for assistance, check the information in this section to see if you can remedy any 

problems yourself. If you do need assistance, please call the 

phone number on the Information section 

or contact your dealer

. 

Symptom

Check List

Solutions

No images on the 
screen.  
I cannot turn on the 
monitor.

Is the power cord 
connected properly?

Check the power cord connection and supply.

Can you see "Check 
Signal Cable" on the 
screen? 

(Connected using the D-sub cable)  
Check the signal cable connection.  
 
(Connected using the DVI cable)  
If you still see an error message on the screen 
when the monitor is connected properly, check 
to see if the monitor status is set to analog.  
Press SOURCE button to have the monitor 
double-check the input signal source.

If the power is on, reboot 
the computer to see the 
initial screen(the login 
screen), which can be 
seen. 

If the initial screen (the login screen) appears, 
boot the computer in the applicable mode (the 
safe mode for Windows ME/XP/2000) and then 
change the frequency of the video card.  
(Refer to the 

Preset Timing Modes

)  

 
If the initial screen (the login screen) does not 
appear, 

contact the Service Center or your 

dealer

.  

Can you see "Not 
Optimum Mode", 
"Recommended Mode 
1680 X 1050 60 Hz" on 
the screen? 

You can see this message when the signal 
from the video card exceeds the maximum 
resolution and frequency that the monitor can 
handle properly.  
 
Adjust the maximum resolution and frequency 
that the monitor can handle properly.  
 
If the display exceeds SXGA or 75 Hz, a "Not 
Optimum Mode", "Recommended Mode 1680 
X 1050 60 Hz" message is displayed. If the 
display exceeds 85 Hz, the display will work 
properly but the "Not Optimum Mode", 
"Recommended Mode 1680 X 1050 60 Hz" 
message appears for one minute and then 
disappears.  
Please change to the recommended mode 
during this one-minute period.  
(The message is displayed again if the system 
is rebooted.)