Atlantis Land A05-15AM-E01 ユーザーズマニュアル
ENGLISH
A05-15AM-E01_X02
12 - 44
5.1 Factory Preset Timings
Timing
Horizontal
Frequency
(KHz)
Frequency
(KHz)
Vertical
Frequency
(Hz)
Frequency
(Hz)
Sync
Polarity
(H/V)
Polarity
(H/V)
VGA 720 X 400
31.467
70.082
- / +
VESA 640 X 480
31.469
59.940
- / -
VESA 640 X 480
37.861
72.809
- / -
VESA 640 X 480
37.500
75.000
- / -
VESA 800 X 600
37.879
60.317
+ / +
VESA 800 X 600
48.077
72.188
+ / +
VESA 800 X 600
46.875
75.000
+ / +
VESA 1024 X 768 48.363
60.004
- / -
VESA 1024 X 768 56.476
70.069
- / -
VESA 1024 X 768 60.023
75.029
+ / +
6 Signal Connector Pin-outs
To connect VGA, 8514A or IBM-compatible graphics adapters, use a 15 pin mini D-type male connector.
6.1 15-pin Mini D-type Male Connector
1 Red
Video 6 Red
Ground 11 Ground
2 Green
Video 7 Green
Ground
12 Serial
Data/I/O
3
Blue Video
8
Blue Ground
13
H. Sync
4 Ground
9 No
Connection 14 V.
Sync
5
No Connection 10
Sync Ground 15
Serial Clock Input
7
Troubleshooting
CAUTION: Never disassemble the monitor or attempt to service the product yourself. This will
also void warranty. Contact the Atlantis Help Desk Center (see the Warranty Certificate)
also void warranty. Contact the Atlantis Help Desk Center (see the Warranty Certificate)
•
The monitor does not respond after you turn on the system.
Make sure that the monitor is turned on. Turn off the power and check the monitor’s
power cord, AC adapter, and signal cable for proper connection.
Make sure that the monitor is turned on. Turn off the power and check the monitor’s
power cord, AC adapter, and signal cable for proper connection.
•
Appear the “ No Input the Signal"
Check the connecting of the audio cable between the monitor and the computer.
Check the connecting of the audio cable between the monitor and the computer.
•
Appear the “ Input Not the Supported"
Input signal are insuperable, refer the “Video Modes”
Input signal are insuperable, refer the “Video Modes”
•
The appearance is not at the screen center.