ONKYO BR925 ユーザーズマニュアル
24
Basic Operations
You can select HDD, CD, AM, FM, or a connected component (LINE 1, TAPE, DOCK, USB or DIGITAL) as the input
source.
source.
On the CD/HDD receiver, press the [INPUT
SELECTOR] button repeatedly.
SELECTOR] button repeatedly.
The input sources are selected in the following order.
* Input Display can be changed (see page 45).
Tip:
You can also use the CD/HDD receiver’s MULTI JOG
dial to switch the input source while any input source is
displayed.
You can also use the CD/HDD receiver’s MULTI JOG
dial to switch the input source while any input source is
displayed.
On the remote controller, press the INPUT
[
[
q]/[w] buttons repeatedly.
Each time you press these buttons, you can select the
previous or next input source.
previous or next input source.
Using other buttons:
HDD
1 button*
Switches to HDD for playback.
CD
CD
1 button*
Switches to CD for playback.
USB
USB
1 button*
Switches to USB for playback.
TUNER (BAND) button
Selects AM or FM as the input source. If you press this
button repeatedly, you can switch the radio band.
TUNER (BAND) button
Selects AM or FM as the input source. If you press this
button repeatedly, you can switch the radio band.
* These buttons also work in the Standby mode.
Turn the [VOLUME] control clockwise to
increase the volume or counterclockwise to
decrease it.
increase the volume or counterclockwise to
decrease it.
You can also use remote controller’s VOL [
q]/[w] but-
ton.
The default setting is “10”. You can adjust the volume
from MIN, 01 through 41 to MAX.
The default setting is “10”. You can adjust the volume
from MIN, 01 through 41 to MAX.
Turn down the volume, then connect your stereo head-
phones to the PHONES minijack.
You can adjust the volume and mute the sound, as
explained earlier.
The speakers output no sound while the headphones are
connected.
phones to the PHONES minijack.
You can adjust the volume and mute the sound, as
explained earlier.
The speakers output no sound while the headphones are
connected.
Notes:
• Do not connect the audio output jack of any other device
• Do not connect the audio output jack of any other device
to the PHONES jack, because it may cause a malfunction
of the device.
of the device.
• When you use headphones, Onkyo recommend that you
deactivate Audyssey EQ™. About Audyssey EQ™, see
page 26.
page 26.
Selecting the Input Source
HDD CD USB FM
AM
LINE
DIGITAL*
DOCK* TAPE*
Adjusting the Volume
Remote
controller
CD/HDD receiver
Using Headphones
PHONES jack