Samsung T1000LM026 ユーザーズマニュアル
Spinpoint M8U-Internal Product Manual REV 3.4
83
INSTALLATION
6.4
Bulk-Only Transport
N2 Product transfer data by USB Mass Storage Class Bulk Only Transport Specification.
6.4.1 Functional Characteristics
6.4.1.1 Bulk-Only Mass Storage Reset (Class-Specific request)
This request is used to reset the mass storage device and its associated interface.
This class-specific request shall ready the device for the next CBW from the host.
The host shall send this request via the default pipe to the device. The device shall preserve the value of its
bulk data toggle bits and endpoint STALL conditions despite the Bulk-Only Mass Storage Reset.
The device shall NAK the status stage of the device request until the Bulk-Only Mass Storage Reset is
complete.
This class-specific request shall ready the device for the next CBW from the host.
The host shall send this request via the default pipe to the device. The device shall preserve the value of its
bulk data toggle bits and endpoint STALL conditions despite the Bulk-Only Mass Storage Reset.
The device shall NAK the status stage of the device request until the Bulk-Only Mass Storage Reset is
complete.
To issue the Bulk-Only Mass Storage Reset the host shall issue a device request on the default pipe of:
• bmRequestType: Class, Interface, host to device
• bRequest field set to 255 (FFh)
• wValue field set to 0
• wIndex field set to the interface number
• wLength field set to 0
• bRequest field set to 255 (FFh)
• wValue field set to 0
• wIndex field set to the interface number
• wLength field set to 0
6.4.1.2 Get Max LUN (Class-Specific request)
The device may implement several logical units that share common device characteristics. The host uses
bCBWLUN to designate which logical unit of the device is the destination of the CBW. The Get Max LUN
device request is used to determine the number of logical units supported by the device. Logical Unit
Numbers on the device shall be numbered contiguously starting from LUN 0 to a maximum LUN of 15 (Fh).
bCBWLUN to designate which logical unit of the device is the destination of the CBW. The Get Max LUN
device request is used to determine the number of logical units supported by the device. Logical Unit
Numbers on the device shall be numbered contiguously starting from LUN 0 to a maximum LUN of 15 (Fh).
To issue a Get Max LUN device request, the host shall issue a device request on the default pipe of:
• bmRequestType: Class, Interface, device to host
• bRequest field set to 254 (FEh)
• wValue field set to 0
• wIndex field set to the interface number
• wLength field set to 1
• bmRequestType: Class, Interface, device to host
• bRequest field set to 254 (FEh)
• wValue field set to 0
• wIndex field set to the interface number
• wLength field set to 1
The device shall return one byte of data that contains the maximum LUN supported by the device. For
example, if the device supports four LUNs then the LUNs would be numbered from 0 to 3 and the return
value would be 3. If no LUN is associated with the device, the value returned shall be 0. The host shall not
send a command block wrapper (CBW) to a non-existing LUN.
Devices that do not support multiple LUNs may STALL this command.
example, if the device supports four LUNs then the LUNs would be numbered from 0 to 3 and the return
value would be 3. If no LUN is associated with the device, the value returned shall be 0. The host shall not
send a command block wrapper (CBW) to a non-existing LUN.
Devices that do not support multiple LUNs may STALL this command.