Samsung SE-S204S ユーザーズマニュアル

ページ / 17
PC does not recognize a drive.
● Check if the USB 2.0 converter cable is connected correctly.
● Check if the power switch of back of drive is turned on.
A video file is not played.
●  Check it after installing the newest codec program. 
●  Use the newest codec file to watch the movie file.
Select the codec program that supports the related compressing type and 
install it.
A disc tray is not opened.
●  Check the connection of a power cord or power cable.
●  If it is not opened at the state of power on, reboot the PC and open it by 
pressing the Open/Close button. But still it is not opened, turn the power off 
and open it pushing by inserting a thin pin(clip) into the emergency hole.    
A screen is cut and a speed is 
slow when playing a video with 
S/W MPEG.
● Reduce a play screen size.
●  Check the resolution of display and correct it to the proper resolution in 
the control panel of windows.
A disc is not recognized and a 
speed is slow.
●  Check a DISC condition and use it after cleaning.
Easy checks
The no disc message is 
appeared in spite of inserting a 
disc.
●  If you press the play button so quickly after inserting a disc, a disc 
could not be recognized. Open and close the disc tray, and try again.
● Use a disc after cleaning.
The function of pulling out the 
disc being formatted with InCD is 
included.
●  Click the right mouse on the tray icon(It is at the right of taskbar in 
the bottom of monitor.) and select “Take Out” to take out the CD. 
●  Select a drive that has a disc in the windows explorer and click the right 
mouse, and select “Take Out” to take out the CD. 
The CD is not created when 
recording NERO and it is recorded 
to a image file.
●  It is a symptom that SE-S204S is not selected but “Image 
Recoder” is selected when selecting a record. Select a recorder 
selection in the NERO top menu and record by selecting 
SE-S204S in the recorder selection window.
●  When installing the recording software, pay attention that Image 
Recorder is selected in the case that the software is installed first 
and ROM drive is installed.
A recorder cannot recognize a 
disc.
●  Upgrade the firmware to the newest at www.samsung-ODD.com and 
reinstall the recording software provided to bundle.
 
11
12               
SE-S204S-ENG(외장형).indd   14-15
SE-S204S-ENG(외장형).indd   14-15
2007-10-30   오후 1:29:17
2007-10-30   오후 1:29:17