Samsung SF-3100 ユーザーズマニュアル
Installation
11
Installation
6
Insert the print cartridge in the carrier.
7
Push the cartridge firmly in the direction of the arrow until it clicks into
place.
8
Close the cover and replace the Control Panel after installing the print
cartridge.
The display shows ‘NEW ’. Press ➛ or ❿ to make your selection.
9
Press (Start/Enter) after selecting ‘NEW’ or ‘OLD’.
If the cartridge is installed improperly, ‘NO CARTRIDGE’ is displayed.
Remove the cartridge and re-insert it.
Remove the cartridge and re-insert it.
Note
When you insert a new cartridge, you must choose ‘NEW’. When you insert a used car-
tridge, choose ‘OLD’. This helps you check the amount of ink you have left. If you mix up
several used cartridges, it will be difficult to check the amount of ink you have left. Once
you have put in a new print cartridge, use it until it has completely run out of ink.
tridge, choose ‘OLD’. This helps you check the amount of ink you have left. If you mix up
several used cartridges, it will be difficult to check the amount of ink you have left. Once
you have put in a new print cartridge, use it until it has completely run out of ink.
Carrier