Samsung SF-3100 ユーザーズマニュアル

ページ / 111
Special Features
6-11
Chapter 6
TAM Options  (SF-3100T only)
OPTIONS
STATUS
CHARGE SAVE
Lets you dial into your machine from a remote phone and check 
whether anyone has left a message without being charged. When 
Charge Saver is ON, the machine answers your call on the number of 
rings you have specified in the ‘Rings to Answer’ option. If there is no 
message, the machine answers on the second ring after the number of 
‘Rings to Answer’. This gives you time to hang up the phone before 
the machine answers and saves the price of the call.
Choose ON to turn on Charge Save.
Choose OFF to turn off Charge Save.
Message Paging
This feature allows the fax machine to transfer an incoming message to 
the specified place where you are.
Choose ON to turn on the Message Paging feature, and enter the 
telephone number to which you want it transferred.
Choose OFF to disable it.
CALL 
MONITOR 
Enables you to hear callers leave messages on your machine.  
Choose ON to turn the feature on. 
Choose OFF to turn the feature off.
RECORDING 
TIME
You can select the maximum time allowed for caller messages. The 
display shows you the time limit available: OFF, 30, 60, or 90 seconds. 
Choose the desired time.
REMOTE 
PASSWORD
You can change the three-character password used to access your 
machine from a remote phone. The password is preset to “#139#” at 
the factory. The first and the last #’s are fixed, but you can change the 
three middle numbers. Enter the characters you want to use.
BATTERY 
ALARM
You can turn on the Battery Alarm feature. With this feature on, the 
machine displays a low (or no) battery message in the LCD and sounds 
beeps to alert you of the low (or no) battery condition.
Choose ON to turn on the Battery Alarm feature.
Choose OFF to turn off the Battery Alarm feature.
SILENCE 
CHECK
In TAM mode, the machine decides the next action when silence is 
detected for ten seconds. Available suboptions are:
- Receive: Switches to FAX Receive Mode. 
- Recording: Keeps the recording silent. 
- Disconnect: Disconnects the line and returns to Standby Mode.
HOWLER 
CHECK
In TAM mode, the machine decides the next action when a howling is 
detected for 9 seconds. Available suboptions are:
ON: Disconnect the line and returns to Standby Mode.  
OFF: Disregards howling.