Samsung SCW-230 ユーザーズマニュアル

COMPACT

Recordable

WRITING

DISC IN

ReWritable

The audio output connector enables you to plug stereo headphones into the 
drive. It requires a 3.6mm stereo mini-jack.

This control dial adjusts the volume for your headphones. You can only use the 
headphone jack and volume control when you have installed the required software 
utilities. For example, the Microsoft Windows Media player can be used.

When you write data in the disc.(Blink:Test mode, On:Write mode)

When you play a disc or when you place a disc in the tray.

The Disc Tray opens and closes automatically when you press the Open/Close 
button.

◆ 

When you place a disc in the tray, make sure that the label on the disc is 

facing upwards. If you are not loading or unloading a disc, the disc tray 
should remain closed.

Press open/close key.

You can connect a sound card to your drive using this four-pin connector.

☛ 

This function is not covered in detail in this guide. Refer to the documentation 

supplied with your sound card.

Usually, this is a pre-set configuration as illustrated below:

☛ 

Verify that the setting is as illustrated. If it is not, simply remove the jumper 

and place it in the correct position.

This input/output interface connector is used to connect the 40-pin flat cable 
from the IDE interface to the CD-R/RW drive. 

The power connector is a four-conductor male plug.

C
S

S
L

M
A

SCW-230(E/G/F/S)  3/31/00 2:35 PM  Page 2