Seagate ST3000DM003 ユーザーズマニュアル

ページ / 34
© 2014 Seagate Technology LLC. All rights reserved.
Publication number: 100710254, Rev. F  May 2014
Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/
or other countries. Desktop HDD and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one
of its affiliated companies in the United States and/or other countries. All other trademarks or registered trademarks are the property
of their respective owners.
No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC.
Call 877-PUB-TEK1(877-782-8351) to request permission.
When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes.
Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of
the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will
vary based on various factors, including file size, file format, features and application software. Actual data rates may vary
depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may
be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit 
),
and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or
specifications.
Document Revision History
Revision
Date
Description of Change
Rev. A 
01/14/2013
Initial release.
Rev. B
02/13/2013
Updated internal data transfer rate in Table 1 and section 2.4.
Rev. C
03/14/2013
Updated environmental information note on page 18; 
added rate workload to Table 1 specifications.
Rev. D
03/07/2014
Revised: copyright statement - below; rated workload statement - page 4: warranty 
URL & message - pages 4 & 12; Replaced MTBF w/AFR in rated workload 
statement - page 4.
Rev. E
05/08/2014
Added metric “mm” values to mechanical drawing (page 16)
Rev. F
05/29/2014
Corrected ST model # (page 2-3, 5 & 23); edits to DC power table (page 8)