Seagate ST100FM0012 ユーザーズマニュアル
P
ULSAR
.2 SAS P
RODUCT
M
ANUAL
, R
EV
. C
19
6.0
P
HYSICAL
/
ELECTRICAL SPECIFICATIONS
This section provides information relating to the physical and electrical characteristics of the drive.
6.1
P
OWER SPECIFICATIONS
The drive receives DC power (+5V and +12V) through the standard SAS interface.
6.1.1
Power consumption
drives tested, under nominal conditions, using +5V and +12V input voltage at 60°C ambient temperature.
• Startup power
• Startup power
Startup power is measured from the time of power-on to the time that the drive reaches operating condition and can process media
access commands.
access commands.
• Peak operating mode
During peak operating mode, the drive is tested in various read and write access patterns to simulate the worst-case power consump-
tion.
tion.
• Idle mode power
Idle mode power is measured with the drive powered up and ready for media access commands, with no media access commands
having been received from the host.
having been received from the host.
6.2
AC
POWER REQUIREMENTS
None.