Seagate ST3000VM002 ユーザーズマニュアル

ページ / 40
12
Video 3.5 HDD SATA Product Manual, Rev. A
Drive Specifications
*All specifications above are based on native configurations.
** One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
*** During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power
to operational levels.
2.2
Formatted capacity
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
Voltage tolerance (including noise)
5V: ±5%
12V: ±10%        
5V: ±5%
12V: ±10%
Ambient temperature (drive case temperture)
0° to 75°C (operating)
–40° to 70°C (non-operating)
0° to 75°C (operating)
–40° to 70°C (non-operating)
Temperature gradient
20°C per hour max (operating)
30°C per hour max (nonoperating)
20°C per hour max (operating)
30°C per hour max(nonoperating)
Relative humidity
5% to 90% (operating)
5% to 95% (nonoperating)
5% to 90% (operating)
5% to 95% (non-operating)
Relative humidity gradient (max)
30% per hour 
30% per hour 
Wet bulb temperature (max)
37.7°C max (operating)
40.0°C max (nonoperating)
37.7°C max (operating)
40.0°C max (non-operating)
Altitude, operating
–304m to 3048m
(–1000 ft to 10,000 ft)
–304m to 3048m
(–1000 ft to 10,000 ft)
Altitude, non-operating 
(below mean sea level, max)
–304m to12,192m
(–1000ft to 40,000+ ft)
–304m to 12,192m
(–1000 ft to 40,000+ ft)
Operational Shock (max)
80 Gs at 10ms 
80 Gs at 10ms
Non-Operational Shock (max)
300 Gs at 2ms
300 Gs at 2ms
Vibration, operating
2Hz to 22Hz: 0.25 Gs, Limited 
displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
2Hz to 22Hz: 0.25 Gs, Limited 
displacement
22Hz to 350Hz: 0.50 Gs
350Hz to 500Hz: 0.25 Gs
Vibration, non-operating
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
5Hz to 22Hz: 3.0 Gs
22Hz to 350Hz: 3.0 Gs
350Hz to 500Hz: 3.0 Gs
Drive acoustics, sound power
Idle***
2.3 bels (typical)
2.4 bels (max)
2.3 bels (typical)
2.4 bels (max)
Seek
2.8 bels (typical)
2.9 bels (max)
2.8 bels (typical)
2.9 bels (max)
Non-recoverable read errors
1 per 10
14 
bits read
1 per 10
14 
bits read
Annualized Failure Rate (AFR)
0.55%
0.55%
Warranty
To determine the warranty for a specific drive, use a web browser to access the 
following web page: 
From this page, click on the “Verify Your Warranty” link. You will be asked to 
provide the drive serial number, model number (or part number) and country of 
purchase. The system will display the warranty information for your drive.
Load/Unload cycles (25°C, 50% rel. humidity)
300,000 at 25°C, 50% rel. humidity 
300,000
Supports Hotplug operation per the Serial ATA 
Revision 3.0 specification
Yes
Yes
Model
Formatted
capacity*
Guaranteed
sectors 
Bytes per sector
ST4000VM000
4000GB
7,814,037,168
4k
ST3000VM002
3000GB
5,860,533,168
Table 1 Drive specifications summary for 4TB and 3TB models (continued)
Drive Specification*
ST4000VM000
ST3000VM002