Seagate ST250VT000 ユーザーズマニュアル

S

EAGATE 

V

IDEO 

2.5 HDD P

RODUCT 

M

ANUAL

, R

EV

. A

  16

 C

ONFIGURING AND 

M

OUNTING THE 

D

RIVE 

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. Refer 
to



Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling.



Use only M3 x 0.5 mounting screws.



Do not overtighten the mounting screws. Maximum torque: 4.0 in-lb (0.4519 N-m).



Four (4) threads (0.080 in, 2.032 mm) minimum screw engagement recommended.



Avoid excessive drive distortion when mounting. Refer to the following specifications for stiffness/deflection information:  

Operating: no performance degradation, emitted noise, 
mechanical damage, or hard errors

10 mm probe: 1.02kgf or 
  5 mm probe: 0.92kgf

Non-operating: no hard errors

20 mm probe: 2.0kgf at any point of top cover
20 mm probe: 15.0kgf at top cover edges only

BREATHER HOLE,

DO NOT COVER OR SEAL