Seagate ST2000VN0001 ユーザーズマニュアル

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock

may be applied in the X, Y or Z axis.

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs
based on half-sine shock pulses of 2ms during read operations. Shocks should not be repeated more than two times per second.

The non-operating shock level that the drive can experience without incurring physical damage or degradation in performance when
subsequently put into operation is 300 Gs based on a non-repetitive half-sine shock pulse of 
2ms duration.

The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are
specified below.

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws.

Vibration may be applied in the X, Y or Z axis. Throughput may vary if improperly mounted.

The maximum non-operating vibration levels that the drive may experience without incurring physical damage or degradation in
performance when subsequently put into operation are specified below.

5% to 90% non-condensing (30% per hour max)

5% to 95% non-condensing (30% per hour max)

37.7°C (99.9°F max)

40°C (104°F max)

–304m to 3048m (–1000 ft. to 10,000 ft.)

–304m to 12,192m (–1000 ft. to 40,000+ ft.)

2Hz to 22Hz

0.25 Gs (Limited displacement)

22Hz to 350Hz

0.50 Gs

350Hz to 500Hz

0.25 Gs

5Hz to 22Hz

3.0 Gs (Limited displacement)

22Hz to 350Hz

3.0 Gs

350Hz to 500Hz

3.0 Gs