Seagate ST9500621NS ユーザーズマニュアル

Constellation.2 Serial ATA Product Manual, Rev. B

27

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the 
bottom-mounting holes. See Figure 6 for drive mounting dimensions. Follow these important mounting precau-
tions when mounting the drive:

• Allow a minimum clearance of

 

0.030 in (0.76 mm)

 

around the entire perimeter of the drive for cooling as a 

guideline. Please refer to Section 4.5 for final cooling requirements.

• Use only

 

M3 x 0.5 metric mounting screws.

• Four (4) threads (0.080 in) minimum screw engagement recommended. Also ensure maximum screw length 

does not bottom out in mounting holes.

• Do not overtighten the mounting screws (maximum torque: 4.5 in-lb, ± 0.45 in-lb).