Seagate ST9200011FS ユーザーズマニュアル

6

Pulsar Product Manual, Rev. A

Maximum Burst Transfer Rate

300MB/s

Peak sequential 128KB read/write data transfer rate (MB/s max)

240/220

Sustained sequential 128KB read/write data transfer rate (MB/s)

200/100

200/60

200/30

Peak 4KB random read/write command rate (IOPs)

30,000/25,000

Sustained 4KB random read/write command rate (IOPs)

25,000/5200

25,000/2600

Sustainable 4KB Random combined IOPS for 5 year Endurance

 

(65%/35% R/W, 70% Duty Cycle) 

10,500

[1]

Testing performed at Queue Depth = 32, Sequentially Preconditioned drive, using IOMeter 2008.6.28.

[2]

Testing performed at Queue Depth = 32, Sequentially Preconditioned drive, using IOMeter 2006.7.27.

[3]

Testing performed at Queue Depth = 32, Randomly Preconditioned drive, using IOMeter 2008.6.28.

[4]

Testing performed at Queue Depth = 32, Randomly Preconditioned drive, using IOMeter 2006.7.27.

[5]

Testing performed at Queue Depth = 32, Non-Preconditioned drive, using IOMeter 2006.7.27.

ttp://www.iometer.org/

http://sourceforge.net/projects/iometer/

.

 

IOMeter is licensed under the Intel Open Source License and the GNU General Public License. Intel 
does not endorse any IOMeter results. 

 

 
Peak performance is defined as the typical best case performance that the product will be able to 
achieve when the product is preconditioned as mentioned and host commands are aligned on 4KB 
boundaries.

Sustained performance is defined as the typical worst case performance that the product will be able to 
achieve when the product is preconditioned as mentioned and host commands are aligned on 4KB boundar-
ies. Write values also take into account the worst case performance throttling that may occur to ensure the 
product meets specified reliability specifications.

Due to the nature of Flash memory technologies there are many factors that can result in values different than 
those stated in this specification. Some discrepancies can be caused by bandwidth limitations in the host 
adapter, operating system, or driver limitations. It is not the intent of this manual to cover all possible causes of 
performance discrepancies.

When evaluating performance of SSD devices, it is recommended to measure performance of the device in a 
method that resembles the targeted application using real world data and workloads. Test time should also be 
adequately large to ensure that sustainable metrics and measures are obtained. 

Maximum height

7.0 mm (0.276 in)

Maximum width

70.1 mm (2.76 in)

Maximum length

100.53 mm (3.958 in)

Max weight

135 g (0.298 lb)