Seagate ST930817AM データシート
20
EE25.2 Series Product Manual, Rev. E
2.11.1.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse
of 2 msec duration.
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 900 Gs based on a nonrepetitive half-sine shock pulse
of 1 msec duration.
in performance when subsequently put into operation is 900 Gs based on a nonrepetitive half-sine shock pulse
of 1 msec duration.
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 400 Gs based on a nonrepetitive half-sine shock pulse
of 0.5 msec duration.
in performance when subsequently put into operation is 400 Gs based on a nonrepetitive half-sine shock pulse
of 0.5 msec duration.
2.11.2
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
2.11.2.1
Operating vibration
The following table lists the maximum vibration levels that the drive may experience while meeting the perfor-
mance standards specified in this document.
mance standards specified in this document.
2.11.2.2
Nonoperating vibration
The following table lists the maximum nonoperating vibration that the drive may experience without incurring
physical damage or degradation in performance when subsequently put into operation.
physical damage or degradation in performance when subsequently put into operation.
2.12
Acoustics
Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All mea-
surements are consistent with ISO document 7779. Sound power measurements are taken under essentially
free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.
surements are consistent with ISO document 7779. Sound power measurements are taken under essentially
free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.
Note.
For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is
defined by the following equation:
defined by the following equation:
5–500 Hz
2.0 G (0 to peak)
Linear swept sine
Max displacement may apply below 10 Hz
X, Y, Z axis, 45° angles
5–500 Hz
.003 G
2
/Hz (5–500 Hz)
X, Y, Z axis, 45° angles
5–500 Hz
5.0 Gs (0 to peak)
Linear swept sine
Max displacement may apply below 22 Hz
X, Y, Z axis, 45° angles
5–500 Hz
.025 G
2
/Hz, 3.5 Grms (5–500 Hz)
X, Y, Z axis, 45° angles