Seagate ST100FX0002 ユーザーズマニュアル

Pulsar XT.2 SAS Product Manual, Rev. B

31

a. Operating—normal

The drive, as installed for normal operation, shall operate error free while subjected to intermittent shock not 
exceeding:

• 1000 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis. Shock is not to be repeated more than once every 2 seconds.

This specification does not cover connection issues that may result from testing at this level. 

b. Non-operating

The limits of non-operating shock shall apply to all conditions of handling and transportation. This includes 
both isolated drives and integrated drives.

The drive subjected to nonrepetitive shock not exceeding the three values below, shall not exhibit device 
damage or performance degradation.

• 1000 Gs at a maximum duration of 0.5ms (half sinewave)

Shock may be applied in the X, Y, or Z axis.

c. Packaged

Seagate finished drive bulk packs are designed and tested to meet or exceed applicable ISTA and ASTM 
standards. Volume finished drives will be shipped from Seagate factories on pallets to minimize freight 
costs and ease material handling. Seagate finished drive bulk packs may be shipped individually. For less 
than full shipments, instructions are printed on the bulk pack carton for minimum drive quantities and proper 
drive placement.

      

Image may not represent actual product, for reference only.