Seagate ST500LT033 ユーザーズマニュアル
S
EAGATE
L
APTOP
U
LTRATHIN
HDD SATA P
RODUCT
M
ANUAL
, R
EV
. A
6
D
RIVE
S
PECIFICATIONS
2.3
R
ECORDING AND
I
NTERFACE
T
ECHNOLOGY
Recording method
Perpendicular
Recording density
1885 Kb/in
Track density
366 ktracks/in avg
Areal density
690 Gb/in
2
avg
Spindle speed
5400 RPM +/- 0.2%
Sustained data transfer rate
100 MB/s max
I/O data-transfer rate
600 MB/s max
2.4
P
HYSICAL
C
HARACTERISTICS
Height (max)
Width
69.85 ± 0.25 mm (2.750 ± 0.010 in)
Length
100.35 +0.20 / -0.25 mm (3.951 +0.008 / -0.010 in)
Typical weight
<93g (0.205lb)
Cache buffer
16 MB (16,192 KB)
2.5
S
EEK TIME
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The
specifications in the table below are defined as follows:
specifications in the table below are defined as follows:
Track-to-track seek time is an average of all possible single-track seeks in both directions.
Average seek time is a true statistical random average of at least 5000 measurements of seeks between random tracks, less overhead.
2.6
S
TART
/
STOP TIMES
Table 2
Start/stop times
Typical seek times (ms)
Typical
Max @ 25
°
C
Power-on to ready (sec)
3.0
3.2
Power-on to ready (sec) (SED models)
3.0
3.5
Standby to ready (sec)
2.5
3.0
Interface
Serial ATA (SATA)
All models
5.0 ± 0.20 mm (0.197 ± 0.008 in)
Table 1
Typical seek times
Typical seek times (ms)
Read
Track-to-track
1.5
Average
13.0
Average latency
5.6
N
OTE
These drives are designed to consistently meet the seek times represented in this manual. Physical
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values.
However, due to the manner in which these drives are formatted, benchmark tests that include
command overhead or measure logical seeks may produce results that vary from these specifications.
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values.
However, due to the manner in which these drives are formatted, benchmark tests that include
command overhead or measure logical seeks may produce results that vary from these specifications.