Seagate ST500LX016 ユーザーズマニュアル

S

EAGATE 

U

LTRA 

M

OBILE 

SSHD P

RODUCT 

M

ANUAL

, R

EV

. D

  13

 D

RIVE 

S

PECIFICATIONS 

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the 

certify agency.

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic 

Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the 

product standards for Information Technology Equipment (ITE). Emission levels are defined by EN 55022, Class B and the 

immunity levels are defined by EN 55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when 

used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for 

operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused 

I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their 

products.

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the 

Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework 

requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) 

for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.



Certificate number:

MSIP-REM-STX-UltraMobile



Trade name or applicant:

Seagate Technology LLC



Certificate date:

10 January 2014



Manufacturer/nationality:

USA, Singapore and China

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet 

the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an 

external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the 

customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, 

motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart

 

J, Part 15 

of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

This equipment generates and uses radio frequency energy and if not installed and 

used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installation. However, 

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to 

radio or television, which can be determined by turning the equipment on and off, users are encouraged to try one or more of 

the following corrective measures:



Reorient the receiving antenna.



Move the device to one side or the other of the radio or TV.



Move the device farther away from the radio or TV.



Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.