Seagate ST500LX012ST500LX011 ユーザーズマニュアル
S
EAGATE
U
LTRA
M
OBILE
SSHD P
RODUCT
M
ANUAL
, R
EV
. D
16
C
ONFIGURING AND
M
OUNTING THE
D
RIVE
3.3
D
RIVE
M
OUNTING
Users can mount the drive in any orientation using four screws in the side-mounting holes. Refer to
for drive
mounting dimensions. Follow these important mounting precautions when mounting the drive:
Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling.
Use only M3 x 0.5 mounting screws. Screw length 4mm max.
Do not overtighten the mounting screws. Maximum torque: 4.0 in-lb (0.4519 N-m).
Three (3) threads (0.059 in, 1.5 mm) minimum screw engagement recommended.
Avoid excessive drive distortion when mounting. Refer to the following specifications for stiffness/deflection information:
Figure 4 Mounting Dimensions (for standard models)
Top cover stiffness/deflection
Operating: no performance degradation, emitted noise,
mechanical damage, or hard errors
10 mm probe: 1.02kgf or
5 mm probe: 0.92kgf
Non-operating: no hard errors
20 mm probe: 2.0kgf at any point of top cover
20 mm probe: 15.0kgf at top cover edges only
N
OTE
For reference only. May not represent actual drive.
100.35 mm
+
-
0.200
0.250
3.951 in
+
-
0.008
0.010
69.85 ± 0.250 mm
2.750 ± 0.010 in
8.23 mm
0.324 in
21.209 mm
0.835 in
13.430 mm
0.529 in
3.500 mm
0.138 in
90.60 mm
3.567 in
14.00 mm
0.551 in
2X 2.997 mm
0.118 in
BOTH SIDES
5.00± 0.200 mm
0.197 ± 0.008 in