Seagate STBN8000100 プリント

3

1

2

4

1. Unpack the box.
2. Connect the Seagate NAS.

a. Connect the Ethernet cable from the Seagate NAS to your router.

b. Connect the power adapter from the Seagate NAS to a power outlet.

NOTE: Do not connect the Seagate NAS directly to your computer; 

connect the computer through a router to the Seagate NAS.

3. Press the power button on the Seagate NAS. Wait for the LEDs on the front 

panel to stop blinking. This may take a couple of minutes.

4. Insert the DVD. Follow the on-screen instructions to complete the setup.

1. Déballez le produit.
2. Connectez le serveur NAS Seagate.

a. Connectez le câble Ethernet du serveur NAS Seagate à votre routeur.

b. Branchez le cordon d’alimentation du serveur NAS Seagate sur une 

prise de courant.

REMARQUE : Ne connectez pas le serveur NAS Seagate directement à 

votre ordinateur. Utilisez votre routeur comme intermédiaire entre votre 

ordinateur et le serveur NAS.

3. Appuyez sur le bouton de marche/arrêt du serveur NAS Seagate. Attendez 

que les voyants du panneau avant cessent de clignoter. Cela peut prendre 

quelques minutes.

4. Insérez le DVD. Suivez les instructions à l’écran pour terminer l’installation.

1. Desembale la caja.
2. Conecte Seagate NAS.

a. Conecte el cable Ethernet desde Seagate NAS al enrutador.

b. Conecte el adaptador de corriente desde Seagate NAS a un 

tomacorriente.

NOTA: No conecte Seagate NAS directamente a la computadora; 

conecte la computadora a Seagate NAS mediante un enrutador.

3. Presione el botón de encendido de Seagate NAS. Espere que los 

indicadores LED en el panel frontal terminen de parpadear. Esto puede 

demorar algunos minutos.

4. Inserte el DVD. Siga las instrucciones en pantalla para completar la 

configuración.

2-BAY N

AS

Business

Storage

QUICK S

TART G

UIDE

NAS 2 Bay PANAM 

Part Number: 100710042

Folded Size: 120mm W x 150mm H

Trim Size: mm 600W X 150mm H

Colors: 2C/2C

© 2012 Seagate Technology LLC. All rights reserved. Seagate, Seagate Technology, and the Wave logo are 

trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United 

States and/or other countries. All other trademarks or registered trademarks are the property of their respective 

owners. When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, 

equals one thousand billion bytes. Your computer’s operating system may use a different standard of measurement 

and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions and 

will not be available for data storage. The export or re-export of hardware or software containing encryption may  

be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit 
www.bis.doc.gov). Seagate reserves the right to change, without notice, product offerings or specifications.  
Seagate Technology LLC
10200 S. De Anza Blvd.
Cupertino, CA 95014
U.S.A.
PN: 100710042   06/12

Visit us at our Support pages for assistance with:
•

Installation: Additional instructions and 

troubleshooting assistance

•

To contact support, visit us at our 

Contact Us page.

NOTE: To protect your data, always follow the safe 

removal procedures for your operating system 

when disconnecting your product.

This device complies with Part 15 of the FCC Rules. 

Operation is subject to the following two conditions: (1) 

this device may not cause harmful interference, and (2) 

this device must accept any interference received, 

including interference that may cause undesired 

operation. 
CLASS B 

This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful 

interference in residential installation. This equipment 

generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance 

with the instructions, may cause harmful interference 

to radio communications. 
However, there is no guarantee that interference will 

not occur in a particular installation. If this equipment 

does cause harmful interference to radio or television 

reception, which can be determined by turning the 

equipment off and on, the user is encouraged to try to 

correct the interference by one or more of the 

following measures: 

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and

receiver. 

•  Connect the equipment into an outlet on a circuit

different from that to which the receiver is 

connected. 

•  Consult the dealer or an experienced radio/TV

technician for help.

CAUTION: Any changes or modifications made to this 

equipment may void the user’s authority to operate 

this equipment.

Consultez les pages de support technique de notre 

site pour toute question relative aux points suivants :
•

Installation : Instructions supplémentaires et 

assistance dépannage

•

Pour contacter le support technique, consultez la 

page 

Nous contacter.

REMARQUE : Pour protéger vos données, 

suivez toujours les procédures de retrait sécurisé 

correspondant à votre système d’exploitation lors 

 de la déconnexion du produit.

Consulte nuestras páginas de asistencia técnica para 

recibir ayuda sobre:
•

Instalación: Instrucciones adicionales y asistencia 

para la resolución de problemas

•

Para ponerse en contacto con el servicio de asistencia 

técnica, consulte nuestra página 

Contacto.

NOTA: Para proteger sus datos, asegúrese de 

seguir los procedimientos de extracción segura 

de su sistema operativo siempre que desconecte 

el producto.

100710042