Seagate ST380215ACE ユーザーズマニュアル
18
DB35.3 Series SATA/PATA Product Manual, Rev. F
3.2
Mounting the drive
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the
bottom-mounting holes. See Figure 3 for drive mounting dimensions. Follow these important mounting precau-
tions when mounting the drive:
bottom-mounting holes. See Figure 3 for drive mounting dimensions. Follow these important mounting precau-
tions when mounting the drive:
• Allow a minimum clearance of 0.030 inches (0.76 mm) around the entire perimeter of the drive for cooling.
• Use only 6-32 UNC mounting screws.
• Do not overtighten the mounting screws (maximum torque: 6 inch-lb.).
• Do not use a drive interface cable that is more than 18 inches long.
Figure 3
Mounting dimensions for PATA/SATA drives —top, side and end view
Recommended
case temperatur
measurement location