Seagate ST9750424AS ユーザーズマニュアル
14
Momentus Product Manual, Rev. C
3.10.6
Shock
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive
mounting screws. Shock may be applied in the X, Y or Z axis.
mounting screws. Shock may be applied in the X, Y or Z axis.
Note.
Additional shock protection is provided by the Free Fall Protection feature on ST9750423ASG,
ST9750420ASG, ST9640423ASG and ST9500423ASG models. See Section 3.13.1 for additional
information about this feature.
ST9750420ASG, ST9640423ASG and ST9500423ASG models. See Section 3.13.1 for additional
information about this feature.
3.10.6.1
Operating shock
These drives comply with the performance levels specified in this document when subjected to a maximum
operating shock of 350 Gs based on half-sine shock pulses of 2ms. Shocks should not be repeated more than
one time per axis.
operating shock of 350 Gs based on half-sine shock pulses of 2ms. Shocks should not be repeated more than
one time per axis.
3.10.6.2
Nonoperating shock
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse
of 2 ms duration.
in performance when subsequently put into operation is 800 Gs based on a nonrepetitive half-sine shock pulse
of 2 ms duration.
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock
pulse of 1 ms duration.
in performance when subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock
pulse of 1 ms duration.
The nonoperating shock level that the drive can experience without incurring physical damage or degradation
in performance when subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock
pulse of 0.5 ms duration.
in performance when subsequently put into operation is 1000 Gs based on a nonrepetitive half-sine shock
pulse of 0.5 ms duration.
3.10.7
Vibration
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
drive mounting screws. Vibration may be applied in the X, Y or Z axis.
3.10.7.1
Operating vibration
The maximum vibration levels that the drive may experience while meeting the performance standards speci-
fied in this document are specified below.
fied in this document are specified below.
3.10.7.2
Nonoperating vibration
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degrada-
tion in performance when subsequently put into operation are specified below
tion in performance when subsequently put into operation are specified below
.
5–200 Hz
2.0 Gs (0 to peak). Max displacement may apply below 10 Hz.
200–500 Hz
1.0 Gs (0 to peak).
5–500 Hz:
5 Gs (0 to peak). Max displacement may apply below 22 Hz.