Seagate ST9900605SS ユーザーズマニュアル

Savvio 10K.5 SAS Product Manual, Rev. D

53

The drive may be mounted in any orientation. All drive performance characterizations, however, have been 
done with the drive in horizontal (discs level) and vertical (drive on its side) orientations, which are the two pre-
ferred mounting orientations.

Cabinet cooling must be designed by the customer so that the ambient temperature immediately surrounding 
the drive will not exceed temperature conditions specified in Section 7.5.1, "Temperature."

The rack, cabinet, or drawer environment for the drive must provide heat removal from the electronics and 
head and disc assembly (HDA). You should confirm that adequate heat removal is provided using the temper-
ature measurement guidelines described in Section 7.5.1.

Forced air flow may be required to keep temperatures at or below the temperatures specified in Section 7.5.1
in which case the drive should be oriented, or air flow directed, so that the least amount of air flow resistance is 
created while providing air flow to the electronics and HDA. Also, the shortest possible path between the air 
inlet and exit should be chosen to minimize the travel length of air heated by the drive and other heat sources 
within the rack, cabinet, or drawer environment.

If forced air is determined to be necessary, possible air-flow patterns are shown in Figure 18. The air-flow pat-
terns are created by one or more fans, either forcing or drawing air as shown in the illustrations. Conduction, 
convection, or other forced air-flow patterns are acceptable as long as the temperature measurement guide-
lines of Section 7.5.1 are met. 

Image of the HDA may not represent actual product, for reference only.

Above unit

Under unit

Note.  Air flows in the direction shown (back to front)
           or in reverse direction (front to back)

Above unit

Under unit

Note.  Air flows in the direction shown or
           in reverse direction (side to side)