Seagate ST760211DE-60GB ユーザーズマニュアル
Lyrion Series IDE Product Manual, Rev. F
23
4.2
Supported ATA commands
The following table lists ATA-standard commands that the drive supports. For a detailed description of the ATA
commands, refer to ATA version 7 specification, Volume 1. (www.t13.org)
Table 9:
commands, refer to ATA version 7 specification, Volume 1. (www.t13.org)
Table 9:
Supported commands
Command Name
Command Op-Code Command Type
NOP 00h
Non
data
Recalibrate 10h
Non
data
Read Sector(s)
20h
PIO data-in
Read Sector(s) Ext
24h
PIO data-in
Read DMA Ext
25h
DMA data-in
Read Native Max Address Ext
27h
Non data
Read Multiple Ext
29h
PIO data-in
Write Sector(s)
30h
PIO data-out
Write Sector(s) Ext
34h
PIO data-out
Write DMA Ext
35h
DMA data-out
Set Max Address Ext
37h
Non data
Write Multiple Ext
39h
PIO data-out
Read Verify Sector(s)
40h
Non data
Read Verify Sector(s) Ext
42h
Non data
Execute Drive Diagnostics
90h
Non data
Download Microcode
92h
PIO data-out
SMART
B0h
SMART Disable Operations
Non data
SMART Enable/Disable Autosave
Non data
SMART Enable Operations
Non data
SMART Execute Off-Line Immediate
Non data
SMART Read Data
PIO data-in
SMART Read Log
PIO data-in
SMART Return Status
Non data
SMART Write Log
PIO data-out
Device Configuration
B1h
Device Configuration Restore
Non data
Device Configuration Freeze Lock
Non data
Device Configuration Identify
PIO data-in
Device Configuration Set
PIO data-out
Read Multiple
C4h
PIO data-in
Write Multiple
C5h
PIO data-out
Set Multiple Mode
C6h
Non data
Read DMA
C8h
DMA data-in