Seagate ST8000AS0002 ユーザーズマニュアル
Seagate Archive HDD Product Manual, Rev. A
2
1.0 Introduction
This manual describes the functional, mechanical and interface specifications for the following
Seagate
Seagate
®
Archive HDD model drives:
These drives provide the following key features:
• High instantaneous (burst) data-transfer rates (up to 600MB per second).
• TGMR recording technology provides the drives with increased areal density.
• State-of-the-art cache and on-the-fly error-correction algorithms.
• Native Command Queuing with command ordering to increase performance in demanding applications.
• Full-track multiple-sector transfer capability without local processor intervention.
• Seagate AcuTrac™ servo technology delivers dependable performance, even with hard drive track widths of
only 75 nanometers.
• Seagate SmartAlign™ technology provides a simple, transparent migration to Advanced Format 4K sectors
• Quiet operation.
• Compliant with RoHS requirements in China and Europe.
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.
• Support for S.M.A.R.T. drive monitoring and reporting.
• Supports latching SATA cables and connectors.
• Worldwide Name (WWN) capability uniquely identifies the drive.
1.1
About the SATA interface
The Serial ATA (SATA) interface provides several advantages over the traditional (parallel) ATA interface. The
primary advantages include:
primary advantages include:
• Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers or
other configuration options.
• Thinner and more flexible cabling for improved enclosure airflow and ease of installation.
• Scalability to higher performance levels.
In addition, SATA makes the transition from parallel ATA easy by providing legacy software support. SATA was
designed to allow users to install a SATA host adapter and SATA disk drive in the current system and expect all of
the existing applications to work as normal.
designed to allow users to install a SATA host adapter and SATA disk drive in the current system and expect all of
the existing applications to work as normal.
The SATA interface connects each disk drive in a point-to-point configuration with the SATA host adapter. There is
no master/slave relationship with SATA devices like there is with parallel ATA. If two drives are attached on one
SATA host adapter, the host operating system views the two devices as if they were both “masters” on two
separate ports. This essentially means both drives behave as if they are Device 0 (master) devices.
no master/slave relationship with SATA devices like there is with parallel ATA. If two drives are attached on one
SATA host adapter, the host operating system views the two devices as if they were both “masters” on two
separate ports. This essentially means both drives behave as if they are Device 0 (master) devices.
The SATA host adapter and drive share the function of emulating parallel ATA device behavior to provide backward
compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA
data transfers, resets, and interrupts are all emulated.
compatibility with existing host systems and software. The Command and Control Block registers, PIO and DMA
data transfers, resets, and interrupts are all emulated.
The SATA host adapter contains a set of registers that shadow the contents of the traditional device registers,
referred to as the Shadow Register Block. All SATA devices behave like Device 0 devices. For additional
information about how SATA emulates parallel ATA, refer to the “Serial ATA International Organization: Serial ATA
Revision 3.2”. The specification can be downloaded from
referred to as the Shadow Register Block. All SATA devices behave like Device 0 devices. For additional
information about how SATA emulates parallel ATA, refer to the “Serial ATA International Organization: Serial ATA
Revision 3.2”. The specification can be downloaded from
.
Standard model
SED model
ST8000AS0012
ST8000AS0002
ST6000AS0012
ST6000AS0002
N
OTE
Previous generations of Seagate Self-Encrypting Drive models were called Full Disk Encryption (FDE)
models before a differentiation between drive-based encryption and other forms of encryption was necessary.
models before a differentiation between drive-based encryption and other forms of encryption was necessary.
Note
The host adapter may, optionally, emulate a master/slave environment to host software where two
devices on separate SATA ports are represented to host software as a Device 0 (master) and Device 1
(slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave
environment manages two sets of shadow registers. This is not a typical SATA environment.
devices on separate SATA ports are represented to host software as a Device 0 (master) and Device 1
(slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave
environment manages two sets of shadow registers. This is not a typical SATA environment.