Seagate ST660712DE ユーザーズマニュアル

ST1.3 Series Product Manual, Rev. C

21

This section contains the specifications and instructions for configuring and mounting the drive.

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis-
charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

• Keep the drive in the electrostatic discharge (ESD) bag until you are ready for installation to limit the drive’s 

exposure to ESD.

• Before handling the drives, put on a grounded wrist strap, or ground yourself frequently by touching the metal 

chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire 
installation procedure.

• Handle the drive only by its edges or frame.

• The drive is fragile—handle it with care. Do not press down 

on the drive top cover or attempt to use a pen to write on 
the drive’s label.

• Do not apply more than 0.2 kg of force to the top cover.

Drive HDA Cover

Drive Base Plate

Host PCB

Mounting

Bend Radius 

Corners 

Drive ZIF Connector

Host ZIF Connector

 

Rubber to be at least 
1mm thick. For better 
shock protection, 
thicker rubber is 
better.