Seagate ST423451N/W/WD ユーザーズマニュアル
Elite 23 Installation Guide, Rev. A
35
N drives
Terminating the drive
ST423451N drives are terminated with permanently mounted IC
active terminators. If you install one of these drives and it is not
on the end of the SCSI bus, disable the terminators by removing
the TE jumper from pins 19 and 20 of connector J4A (see Figure
7). If you install the drive on the end of the SCSI bus, enable ter-
mination by installing a jumper on pins 19 and 20 of connector
J4A.
active terminators. If you install one of these drives and it is not
on the end of the SCSI bus, disable the terminators by removing
the TE jumper from pins 19 and 20 of connector J4A (see Figure
7). If you install the drive on the end of the SCSI bus, enable ter-
mination by installing a jumper on pins 19 and 20 of connector
J4A.
Figure 8.
Terminating the drive
Terminator Enabled (TE)
Terminator Disabled (TE)
Pin 19
J01
J4B
J4A
J4A
Pin 1
Pin 1
Pin 1