Seagate ST33000650SS ユーザーズマニュアル

Constellation ES.2 SAS Product Manual, Rev. D

9

• Annualized Failure Rate (AFR) of 0.73%
• Mean time between failures (MTBF) of 1,200,000 hours
• Balanced low mass rotary voice coil actuator
• Incorporates industry-standard Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.)
• 5-year warranty

Standard OEM models are formatted to 512 bytes per block. The block size is selectable at format time and 
must be a multiple of 4 bytes. Users having the necessary equipment may modify the data block size before 
issuing a format command and obtain different formatted capacities than those listed.

To provide a stable target capacity environment and at the same time provide users with flexibility if they 
choose, Seagate recommends product planning in one of two modes:

1.

Seagate designs specify capacity points at certain block sizes that Seagate guarantees current and future 
products will meet. We recommend customers use this capacity in their project planning, as it ensures a 
stable operating point with backward and forward compatibility from generation to generation. The current 
guaranteed operating points for this product are: 

512 5,860,533,168

15D50A3B0h

520 5,736,538,480

155ECA170

528 5,578,747,784

14C84EF88

 

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the 
Mode Select (6) parameter list table in the SAS Interface Manual, part number 100293071. A value of zero in 
the Number of Blocks field indicates that the drive will not change the capacity it is currently formatted to have. 
A number other than zero and less than the maximum number of LBAs in the Number of Blocks field changes 
the total drive capacity to the value in the Number of Blocks field. A value greater than the maximum number of 
LBAs is rounded down to the maximum capacity.

You may order the following items which are incorporated at the manufacturing facility during production or 
packaged before shipping. Some of the options available are (not an exhaustive list of possible options):

• Other capacities can be ordered depending on sparing scheme and sector size requested.
• Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection 

against transit damage. Units shipped individually require additional protection as provided by the single unit 
shipping pack. Users planning single unit distribution should specify this option.

• The  Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each 

standard OEM drive shipped, but extra copies may be ordered.