Seagate ST400FM0103 ユーザーズマニュアル

Seagate 1200 SSD Product Manual, Rev. C

  11

  

Seagate 1200 SSD drives provide high performance, high capacity data storage for a variety of systems with a Serial 

Attached SCSI (SAS) interface. The Serial Attached SCSI interface is designed to meet next-generation computing demands 

for performance, scalability, flexibility and high-density storage requirements.

Seagate 1200 SSD drives are random access storage devices designed to support the Serial Attached SCSI Protocol as 
described in the ANSI specifications, this document, and the SAS Interface Manual (part number 100293071) which 
describes the general interface characteristics of this drive. Seagate 1200 SSD drives are classified as intelligent peripherals 
and provide level 2 conformance (highest level) with the ANSI SCSI-1 standard. The SAS connectors, cables and electrical 
interface are compatible with Serial ATA (SATA), giving future users the choice of populating their systems with either SAS or 
SATA drives. This allows users to continue to leverage existing investment in SCSI while gaining a 12Gb/s serial data 
transfer rate.

The Self-Encrypting Drive models indicated on the cover of this product manual have provisions for “Security of Data at Rest” 
based on the standards defined by the Trusted Computing Group (see www.trustedcomputinggroup.org).

Never disassemble and do not attempt to service items in the enclosure. The drive does not contain user-
replaceable parts. Opening for any reason voids the drive warranty..

Seagate 1200 SSD drives have the following standard features:
• 1.5 / 3.0 / 6.0 / 12.0*

 

Gb Serial Attached SCSI (SAS) interface 

(* 12.0 Gb only available on 2.5” models)

• Integrated dual port SAS controller supporting the SCSI protocol
• Support for SAS expanders and fanout adapters
• Firmware downloadable using the SAS interface
• 128 - deep task set (queue)
• Supports up to 32 initiators
• Jumperless configuration
• User-selectable logical block size (512, 520, 524, 528, 4096, 4160, 4192, or 4224 bytes per logical block)
• Industry standard SFF 1.8 and 2.5-inch dimensions
• ECC, LDPC, and Micro-RAID Error Recovery
• No preventive maintenance or adjustments required 
• Self diagnostics performed when power is applied to the drive 
• Vertical, horizontal, or top down mounting 
• Drive Self Test (DST)
• Parallel flash access channels
• Power loss data protection
• Thin Provisioning with Block Unmap Support
• Silent operation
• Lifetime Endurance Management (available by default on Managed Life models)

Seagate 1200 SSD Self-Encrypting Drive models have the following additional features:
• Automatic data encryption/decryption
• Controlled access
• Random number generator
• Drive locking
• Up to 16 independent data bands
• Cryptographic erase of user data for a drive that will be repurposed or scrapped
• Authenticated firmware download
• SANITIZE command support