Seagate ST318405LW/LC ユーザーズマニュアル

Recommended mating 80-position PCBA mount connectors: 

Seagate P/N:

77678559

Amp US P/N:

2-557101-1

Amp Japan P/N:

5-175474-9

For additional information call Amp FAX service at 1-800-522-6752.     

[1]

Closed end type 68-pin connector used. Terminators enabled.

[2]

Open end type (in-line application) connector used.

[3]

Host need not be on the end of the daisy-chain. Another device can be on the end with the terminator, the
host having no terminator.

[4]

Total interface cable length must not exceed that specified in ANSI document X3T10/1302D (including
host adapter/initiator). The cable length restriction limits the total number of devices allowed.

[5]

SCSI ID7 has highest arbitration priority, then ID15 to ID8 (ID 8 very lowest).

[6]

Last drive on the daisy chain.

[7]

Open-end type 68-pin connector used. If end device, use external terminator and closed-end type 68-pin
connector.

Seagate P/N:

77678703

Amp US P/N:
           or

2-557103-1
94-0680-02-1

787311-1         with polarization

Amp US P/N:
           or

2-557103-2
94-0680-02-2

787311-2         without polarization

Amp Japan P/N: 5-175475-9

Host Adapter

PCBA

Pin 1

(check your

adapter for Pin 1 location)

[6]

SCSI ID 1

SCSI ID 0

SCSI ID 7 [5]

2 through X

SCSI devices [4]

[1]

[1]

[3]

[2]

Terminator

“LW” Model

Drive

Note. Do not mix drives operating
         single-ended with drives
         operating differential on the 
         daisy chain.

[2]