Seagate ST373405LW/LWV/LC/LCV ユーザーズマニュアル
8
Cheetah 73LP Product Manual, Rev. E
3.5
Unformatted and formatted capacities
Formatted capacity depends on the number of spare reallocation sectors reserved and the number of bytes per
sector. The following table shows the standard OEM model capacities:
sector. The following table shows the standard OEM model capacities:
Notes.
[1]
Sector size selectable at format time. Users having the necessary equipment may modify the data block
size before issuing a format command and obtain different formatted capacities than those listed. See
Mode Select Command and Format Command in the
size before issuing a format command and obtain different formatted capacities than those listed. See
Mode Select Command and Format Command in the
SCSI Interface Product Manual, part number
75789509.
[2]
User available capacity depends on spare reallocation scheme selected, the number of data tracks per
sparing zone, and the number of alternate sectors (LBAs) per sparing zone.
sparing zone, and the number of alternate sectors (LBAs) per sparing zone.
3.6
Programmable drive capacity
Using the Mode Select command, the drive can change its capacity to something less than maximum. See the
Mode Select Parameter List table in the
Mode Select Parameter List table in the
SCSI Interface Product Manual, part number 75789509. Refer to the
Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates
that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks
field that is less than the maximum number of LBAs changes the total drive capacity to the value in the block
descriptor number of blocks field. A value greater than the maximum number of LBAs is rounded down to the
maximum capacity.
that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks
field that is less than the maximum number of LBAs changes the total drive capacity to the value in the block
descriptor number of blocks field. A value greater than the maximum number of LBAs is rounded down to the
maximum capacity.
3.7
Factory installed accessories
OEM Standard drives are shipped with the
Cheetah 73LP Installation Guide, part number 100109946 (unless
otherwise specified). The factory also ships with the drive a small bag of jumper plugs used for the J2, J5, and
J6 option select jumper headers.
J6 option select jumper headers.
3.8
Options (factory installed)
All customer requested options are incorporated during production or packaged at the manufacturing facility
before shipping. Some of the options available are (not an exhaustive list of possible options):
before shipping. Some of the options available are (not an exhaustive list of possible options):
• Other capacities can be ordered depending on sparing scheme and sector size requested.
• Single unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection
• Single unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection
against transit damage. Units shipped individually require additional protection as provided by the single unit
shipping pack. Users planning single unit distribution should specify this option.
shipping pack. Users planning single unit distribution should specify this option.
• The
Cheetah 73LP Installation Guide, part number 100109946, is usually included with each standard OEM
drive shipped, but extra copies may be ordered.
3.9
Accessories (user installed)
The following accessories are available. All accessories may be installed in the field.
• Single unit shipping pack.
• Single unit shipping pack.
Unformatted
ST373405
088BB995h (73.4 GB) [2]
97.0 GB
ST336605
0445DCCBh (36.7 GB) [2]
48.5 GB