Seagate ST373405LW/LWV/LC/LCV ユーザーズマニュアル

Cheetah 73LP Product Manual, Rev. E

Table 6 lists the Standard Inquiry command data that the drive should return to the initiator per the format given
in the

SCSI Interface Product Manual, part number 75789509, Inquiry command section.

[ ]

03 means SCSI-3 (Ultra160) implemented.

[ ]

The drive can be changed between these two configurations:
02 means response data in SCSI-2/SCSI-3 format.
12 means the drive uses the hierarchical addressing mode to assign LUNs to logical units (default is 12)

R# Four ASCII digits representing the last four digits of the product Firmware Release number. This informa-

tion is also given in the Vital Product Data page C0h, together with servo RAM and ROM release num-
bers.

Eight ASCII digits representing the eight digits of the product serial number.

[ ]

Bytes 18 through 26 reflect model of drive as listed below:

ST373405LW

33 37 33 34 30 35 4C 57 20

ST373405LWV

33 37 33 34 30 35 4C 57 56

ST373405LC

33 37 33 34 30 35 4C 43 20

ST373405LCV

33 37 33 34 30 35 4C 43 56

ST336605LW

33 33 36 36 30 35 4C 57 20

ST336605LC

33 33 36 36 30 35 4C 43 20

ST336605LCV

33 33 36 36 30 35 4C 43 56

[ ]

9.3.1

Inquiry Vital Product data

Instead of the standard Inquiry data shown in Table 6, the initiator can request several Vital Product Data
pages by setting the Inquiry command EVPD bit to one. The

SCSI Interface Product Manual, part number

75789509, lists the Vital Product Data pages and describes their formats. A separate Inquiry command must
be sent to the drive for each Vital Product Data page the initiator wants the drive to send back.

Table 6:

Cheetah 73LP family drive Standard Inquiry data

Bytes

Data (HEX)

0-15

[03]

[12]

VENDOR ID

16-31

[33]

[37] [33] [34] [30] [35]

[4C] [57]

PRODUCT ID

32-47

48-63

64-79

80-95

00 00 00 00

00 00 00 00 00 00 00 00 00 00 00 00

96-111

[32] COPYRIGHT

112-127

[30] [30] [31]

53 65 61 67 61 74

NOTICE

128-143