Seagate ST91000641SS ユーザーズマニュアル

Constellation.2 SAS Product Manual, Rev. H

9

• Programmable multi-segmentable cache buffer 
• 600 MB/s maximum instantaneous data transfers.
• 7200 RPM spindle. Average latency = 4.16ms
• Background processing of queue
• Supports start and stop commands (spindle stops spinning)
• Adaptive seek velocity; improved seek performance

There is no significant performance difference between Self-Encrypting Drive and standard (non-
Self-Encrypting Drive) models.

• Annualized Failure Rate (AFR) of 0.62%
• Mean time between failures (MTBF) of 1,400,000 hours
• Balanced low mass rotary voice coil actuator
• Incorporates industry-standard Self-Monitoring Analysis and Reporting Technology (S.M.A.R.T.)
• 5-year warranty

Standard OEM models are formatted to 512 bytes per block. The block size is selectable at format time and 
must be a multiple of 4 bytes. Users having the necessary equipment may modify the data block size before 
issuing a format command and obtain different formatted capacities than those listed.

To provide a stable target capacity environment and at the same time provide users with flexibility if they 
choose, Seagate recommends product planning in one of two modes:
1. Seagate designs specify capacity points at certain block sizes that Seagate guarantees current and future 

products will meet. We recommend customers use this capacity in their project planning, as it ensures a 
stable operating point with backward and forward compatibility from generation to generation. The current 
guaranteed operating points for this product are: 

1,953,525,168

74706DB0

976,773,168

3A386030

1,923,076,936

729FD348

961,538,472

394FE9A8

1,876,331,336

6FD68B48

938,165,672

37EB45A8

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the 
Mode Select (6) parameter list table in the SAS Interface Manual, part number 100293071. A value of zero in 
the Number of Blocks field indicates that the drive will not change the capacity it is currently formatted to have. 
A number other than zero and less than the maximum number of LBAs in the Number of Blocks field changes 
the total drive capacity to the value in the Number of Blocks field. A value greater than the maximum number of 
LBAs is rounded down to the maximum capacity.